Frequently Asked Questions

Dive into Our FAQs

Reliable & Trustworthy

Your unwavering partner in reliability and trustworthiness

Top Notch services

Elevating your experience with top-notch services

A: Weld Mesh Systems are used for any type of Perimeter which needs to be protected by a physical but see through barrier. Based on the type of location, a system would be custom designed. The most commonly used solutions are listed below along with the relevant security level. Very High Security - Weld Mesh system would be 358 or in more extreme requirements a 356 System could be used. High Security - Weld Mesh System would be 3510 Spec Solution. . Medium Security - Weld Mesh System would be UNICO Architectural & Industrial Solution.

A: 358 Mesh Size: 358 stands for mesh size/aperture of 3” x 0.5” & wire diameter of 8 gauge (4mm). 356 Mesh Size: Same Mesh size as above and a wire diameter of 6 gauge (6mm). 3510 Mesh Size: Same Mesh size as above with a Horizontal wire diameter of 10 gauges (3.15mm) & VerƟcal wire diameter of 8 gauge (4mm). Architectural System (UNICO): The Mesh size would be 50mm x 200mm & wire diameter would be 8 gauge (4mm). Industrial System: The Mesh size would be 50mm x 100mm and the wire diameters would be 6 gauges OR 7 gauge.

A: For the High security systems, the following post options are available. I-Beam 50mm x 100mm Best security is achieved with this solution. H-Profle For the Architectural and Industrial System, post options available are. I-Beam 50mm x 100mm H-ProĮle Profile Post (This Post doesn’t require any Fixtures) Rectangular Hollow Section not recommended Square Hollow Section not recommended

A: Most commonly used wires are Galvanized wires. Depending on the coating of the Įnished option, the Zinc coating of the wire would be decided based on the durability requirement. Alternatively, Galfan wires (95%Zn – 5%Alu) can also be used. This carries a higher cost and is recommended, when the corrosion factor is the primary concern.

A: Here there are 3 options as listed below. Polyester Powder Coated (PPC) – Dry non corrosive environments. Hot Dipped Galvanized (HDG) – Humid and medium corrosive environments. Thermo marine bonding (PVC) – Highly corrosive environments.

A: Not at all! FlatTents are designed for everyone, from novice campers to seasoned pros. Our user-friendly design ensures a hassle-free setup experience, making it easy for anyone to enjoy the great outdoors.

error: Content is protected !!
×

Hello!

Click one of our contacts below to chat on WhatsApp

× How can I help you?